course links

 

 

 

 

 

Disclaimer

The legislative information contained on this web site is my interpretation of the law based on many years in the health and safety business. A definitive interpretation can only be given by the courts. I will therefore not be held responsible for any accident/incident/prosecution arising as a consequence of anyone using any information obtained from this web site.

Raise the load to the correct stacking height

raise load to stacking heightThe load should now be raised to the correct height for that particular stack. Before doing this the operator should look upwards on high stacks in case of overhead obstructions. A glance to either side is usually a good idea too in case pedestrians are around. Operators should not permit anyone to walk near or underneath a raised load.

Note that it is not necessary to go too high as this makes subsequent lining up of the stack more difficult. As a guide, leave about 10 to 15 cm clearance, (4 to 6 ins).

 

Next Slide

 

 

 

 

site Search