Changing an LP Gas cylinder on a forklift truck

Get a complete set of 130 Powerpoint slides for use by instructors training forklift operators. The slides include the following Pre Shift checks

Changing an LP Gas cylinder on a forklift

To change an LP Gas cylinder use the following steps:

Make sure that there are NO naked lights nearby
Close the valve on the cylinder
Undo the brass fastener connecting the pipe to the cylinder. (It should be hand tightened ONLY)
Unfasten the retaining strap(s)
Remove the cylinder keeping in mind the manual handling regulations
Replace the empty cylinder into it's correct storage place
Fit the new cylinder with the white arrow on the back pointing vertically down
Check for leaks and damage on the new cylinder
Reverse the above procedure taking care to HAND tighten the thread on the brass fitting

For detailed information on LP Gas systems and fitting replacement cylinders check this section of the website which will open in a new window

Next Slide >>

Disclaimer. The legislative information contained on this web site is my interpretation of the law based on many years in the health and safety business. A definitive interpretation can only be given by the courts. I will therefore not be held responsible for any accident/incident/prosecution arising as a consequence of anyone using any information obtained from this web site.

Changing An L P Gas Cylinder

course links

Changing an LP Gas cylinder on a forklift