Tips for searching site

course links





Complete Powerpoint slide presentation for forklift instructors. Ready made training course

Driving into the load. Precautions involved

pallet fingers fouling load

Now the trainees should be taught how to enter the load and elevate it to the traveling position.

One of the big problems with pallet fingers is that there is no such thing as a standard pallet.

When the operator enters the load, quite often the pallet fingers protrude through and they may well damage the load behind. Obviously this needs to be pointed out to the trainees.

mark pallet fingers

A common trick is to place markings on the pallet fingers, (tape or similar), which will indicate when the correct length of pallet fingers have entered the pallet. This is shown here.

The parking brake should be applied before lifting or lowering the load. This normally means having the handle vertical or horizontal.

Next Slide >>
Disclaimer. The legislative information contained on this web site is my interpretation of the law based on many years in the health and safety business. A definitive interpretation can only be given by the courts. I will therefore not be held responsible for any accident/incident/prosecution arising as a consequence of anyone using any information obtained from this web site.

Translate this website