Here is a short article originally by Anna Harris of Toyota forklift trucks about forklift overhead guards. I have added to it, a short section, with videos, showing how guards are tested nowadays.
Every day, forklift operators have a commitment to safety and protection for themselves and those around them. Toyota forklifts have overhead guards designed to help protect operators from falling objects and other obstructions in your facility.
Since their development in the 1960’s, forklift overhead guards have helped to protect operators from falling packages, boxes, and bagged materials. The overhead guard itself is a cage-like sturdy structure covering the overhead of the operator. It is designed with small openings as to not obscure the operators view when looking up to place and retrieve loads.
While overhead guards are a vital safety asset to any forklift machine, they are not meant to protect against every possible impact. For example, in the event of a falling capacity load, the support of the overhead guard structure that received the heaviest loading is designed to absorb energy and deform to deflect the falling capacity load.
This is a hazardous situation for an operator, as falling loads are unpredictable. Therefore, the specific training and safety procedures and protocol in your facility should be adhered to and overhead guards are not a substitute for good judgment and care in load handling. A daily inspection of the overhead guards to check for anything broken, damaged, or missing could help to prevent serious accidents. Some additional helpful safety measures in overhead guard usage include:
Certain industries require hard hat usage when operating forklifts. You should analyze your facilities and application to see whether this is a necessary precaution.
Falling objects could come from any direction. It’s vital to keep your whole body within the bounds of the forklift and under the overhead guard. The overhead guard is intended for protection while an operator is within the confines of the seat. Also, operators are prohibited from operating forklifts with their hands, arms, feet, legs or any other body parts around the overhead guard supports or while outside the overhead guard.
Always reach your local dealer with assistance repairing or replacing an overhead guard. It is against health and safety requirements to use a forklift with a damaged overhead guard.
Any modification to the forklift including its overhead guard that alters the specs of the forklift can cause potential hazards. You are required to get manufacturer approval before making alterations to the forklift including its overhead guard that affect safe forklift operation.
Disclaimer. The legislative information contained on this web site is my interpretation of the law based on many years in the health and safety business. A definitive interpretation can only be given by the courts. I will therefore not be held responsible for any accident/incident/prosecution arising as a consequence of anyone using any information obtained from this web site.
Translate this website