Anticipating hazards for loading and unloading trailers

130 Slide forklift instructor's Powerpoint presentation for £50

Loading and unloading trailers safely

This article is by Toyota forklifts and talks about the importance of safety measures whilst loading and unloading lorries. I have anglicised it a little.

The use of forklifts in shipping and receiving increases productivity and efficiency. Because this is a common practice throughout many industries, drivers, forklift operators, and other associates might skip important safety precautions in pursuit of efficiency. It’s important to remember how much heavy equipment is involved in the loading and unloading process. The maximum legal weight of a loaded semi-truck and trailer can be 44 tons. distributed across 18 wheels. Forklifts have varying weights, but driving into a trailer can easily add a 9,000 lb. weight onto the floor. Not to mention what loads of pallet materials weigh.

In the middle of all this heavy machinery are operators and drivers tasked with moving quickly and efficiently to increase product throughput. Their safety is of utmost importance during this common, but potentially dangerous, shifting of materials using forklifts and other handling equipment. Therefore, it is necessary to remember some important procedures that will help everyone with loading and unloading trailers safely.

Inspect Your Trailers

Inspecting the flooring of trailers is important before loading and after unloading. Trailer floors be inspected to ensure they can support the forklift and load. Remember to check for weaknesses in unsupported sections of floor to help avoid collapse when a forklift enters a trailer. But don’t just stop at a floor inspection. Also look for weaknesses in walls and ceilings of the trailer. When a heavy forklift enters the trailer to deliver or remove a load, it puts pressure on the entire trailer structure. A bowing wall can just as easily lead to trailer collapse as a weak floor. Trailer inspection means inspecting the whole trailer.

Have The Right Wheel Equipment And Jacks

Wheel stops or chocks be put in place during loading and unloading help ensure trucks do not roll while they are being loaded or unloaded. On the occasion that a semitrailer is not attached to a tractor, the standard advises the fixed jacks may be necessary to prevent upending of the trailers. Having these pieces of equipment at your shipping and receiving docks is a must, and failure to use them in a needed application can create dangerous situations, whether you’re a driver, operator, or other associate in the area. This failure can also result in a hefty fine.

Use Dockboards Properly

The connection between the dock and the trailer is one of the most important places where safety protocols are necessary. Both portable and powered dockboards can create hazards if they are not properly maintained and used. All dockboards need to be properly secured by anchors or anti-slipping devices. It’s important to always drive straight across a dockboard so that the forklift does not topple in transition. And never stop on a dockboard, as the sustained weight of the forklift plus load can lead to collapse.

Loading and unloading trailers safely takes teamwork and dedication to inspections procedures. Make sure that you are aware of the loading and unloading protocols in your facility and are prepared to correct others when you see breaches of protocol

Internal Website Links

Translate this website

Search this website

Ads by Google